grow tent carbon filter kit Can-Fan Can-Lite Carbon Filter Fan Exhaust Kit

The Can-Lite Carbon Filter Exhaust Kit is designed and built for convenience and long life.

With 100% Australian Granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation, the Can-Lite Filter from Can Fan is a top choice for ventilation and odor control in your grow room or environment. Each filter has a carbon bed thickness of 2" and is shrink wrapped, boxed and labeled for ease of use.

This kit includes:

• Can Fan Can-Lite Carbon Filter

Can-Filters uses the highest grade carbon carrying the highest CTC (First, why carbon filters? Activated carbon filters have been proven an effective tool for air filtration, removing a variety of VOCs (volatile organic compounds), odors, and other gaseous contaminants. They work by a process known as adsorption where VOCs, odors, and other gaseous contaminants adhere to the carbon’s surface. Can Fan also manufactures the LARGEST and smallest filter sizes allowing for the widest range of versatility in your system design right here in North America.

• Can Fan Max-Fan Mixed Flow Inline Fan or Hurricane 4" Inline Fan

The Max-Fan is the first fan that has been developed with a Computational Fluid Dynamics (CFD) program. CFDs are used for engineering aircraft propulsion engines. The perfectly designed 3D blades of the impeller and stator make this fan extremely powerful and energy-efficient. Compared with other inline fans, efficiency is 50%-100% higher. 6″-14″ come pre-wired with an 8 ft 120 V power cord. Can-Fan brings its innovation to market and sets a new standard for performance. The Max-Fan is a more powerful and efficient fan that takes less energy to run.

• Can Fan or Active Air Ducting

Max-Duct vinyl has triple foil laminate with very durable white PVC with UV inhibitor coating. Comes in 25 ft lengths and includes 2 clamps for easy installation.

• Fan Speed Controller

The Speedster is great multi purpose speed control. Three settings include off, on (full) and variable. Simply use the dial to increase or decrease fan motor speed. 120 volt/15 amps.

Pair one of these carbon filter and fan exhaust kits with one of our HEPA Filter and Fan Intake Kits , and you will have a complete ventilation system.

---

Determining your requirement - Exhaust vs Recirculating (Scrubbing)

You will need to determine whether or not you are exhausting (going from a contaminated environment to a sterile environment in only a single pass through the filter) or recirculating, aka “scrubbing” (exhausting the system back into the contaminated space).

---

Sizing Your Space

Once you’ve determined the type of system you need, it’s time to size your space.

Typically for exhaust we recommend a simple length x width x height /3 calculation. This will give you the amount of air (cubic feet per minute, CFM) that you will need to move to properly ventilate your space allowing for a three-minute air exchange (all the air in the space is exchanged for fresh air every three minutes). This is the number you will match your filter to.

Example:
Room size: 10’x12’x8’ (960 cubic feet)
960 cubic feet / 3 minutes = 320CFM (Minimum recommended CFM to exchange the air every 3 minutes)

For recirculating systems, you can use the same length x width x height but divide by 1.5. This will give you a high cycle rate while still ensuring the removal of a majority of contaminant with each pass through the filter.